Industry information

Touch one machine touch unresponsive solution

Source: KONWHAI TOUCHAuthor: nick Date: 2018-12-27 Click:

  •      In the pace of modern economic development, the Internet has become a trend, and our lives are inseparable from the Internet. Driven by this form, an interactive touch-one machine has also entered people's sights and is widely used.
  •  
  •      When we use the touch all-in-one, we may encounter the phenomenon of touchlessness. At this time, we need to know some troubleshooting methods of the touch-one machine in advance so as to make emergency treatment under special circumstances.
  •  
  •      So, what is the unresponsive response of the touch-one machine?
  •  
  • Touch one machine touch unresponsive solution

  •  
  •   Failure analysis and solution:  
  •  
  •      1. Check if the hard disk is turned off in the “Display Energy Saving Settings”. The method is to right-click on the desktop, select the "Properties" command, then select the "Screen Saver" tab from the dialog box, click the "Settings" button, set the parameter to "Always open" except "Power Case" In addition, the rest are “never”.
  •  
  •      2. In some applications, due to poor grounding performance, the control box housing is covered with a large amount of static electricity, which affects the working electric field inside the control box, resulting in the gradual failure of the touch. At this point, ground the control box housing with a wire and restart it.
  •  
  •      3. Since the touch integrated machine is covered with sound waves when working, if it is not wiped for a long time, the dust will accumulate too much, blocking the reflection stripe of the wave, which will cause the touch integrated machine to work normally. For touch-sensitive displays, use a clean business card or banknote to gently wipe off the dust from the surrounding reflective strips through the gap between the front cover and the touch-sensitive unit, and then restart the computer. For the touch-sensitive unit, open the front cover of the monitor, wipe the dust off the reflective strips with a clean towel, and then restart the computer.
  •  
  •      4. Many touch-one machine control boxes adopt the method of taking power from the power supply of the integrated machine instead of taking power from the host. Therefore, it should also check whether the 5V output of the integrated machine power supply is correct, sometimes the current is too large, causing the fuse to be burned. Replace the fuse.
  •  
  •      The above is about the touch-one machine touch-free reaction processing method, the so-called one piece of expensive wood does not maintain the result will only rot, a diamond will not shine cleanly, even if the quality of the touch one machine is also required to follow The use of the operating code and regular maintenance to avoid the occurrence of faults and timely handling of the touch unit.
  •  
  •  

  •  
  • Other Recommendations:
  •  

KOWNHAI Official-Alibaba International Store
KONWHAI Message online
KONWHAI Email and TEL